Source: https://metroglasspro.com/frameless-shower-doors-nyc/

Custom Shower Glass in NYC

# Frameless Shower Doors in NYC

Custom-measured frameless glass doors for apartments and homes across all five boroughs, with layout, hardware, access, and building requirements reviewed before scheduling.

[Get a Free Estimate](https://metroglasspro.com/contact/)

[Call (332) 999-3846](tel:+13329993846)

## Planning your shower door.

**What we install**

Custom swing doors, sliding doors, fixed panels, tub screens, and corner enclosures. We also assess existing doors for [repair](https://metroglasspro.com/shower-door-repair-nyc/) or replacement.

**What to budget**

Published ranges start at $800–$1,600+ for a single swing door and reach $2,200–$4,500+ for corner enclosures. [Compare prices by layout](https://metroglasspro.com/projects/frameless-shower-door-cost-nyc/). Final pricing follows measurement.

**Where we work**

Manhattan, Brooklyn, Queens, the Bronx, and Staten Island. Share co-op or condo requirements early so we can coordinate the COI, elevator, and installation window.

**How to get a quote**

Send photos, your neighborhood, approximate dimensions if known, and whether this is a new installation, replacement, or repair. [Request a free estimate](https://metroglasspro.com/contact/)  or [text (332) 999-3846](sms:+13329993846).

Custom Measurements·Five Borough Service·Project-Specific Quotes·Free Estimates

Before You Choose Glass

## The right frameless quote starts with the bathroom conditions.

Some buyers need a clean Manhattan apartment install, others need a Queens or Brooklyn layout decision, and others are comparing repair, replacement, and full custom frameless glass. These are the details that separate a useful quote from a generic price range and help you avoid choosing the wrong page for the job.

### New install, replacement, or repair?

A finished renovation, an older framed enclosure, and a leaking or dragging door are different jobs. Start with the right path so the quote conversation does not waste time.

### Apartment or house?

A Manhattan co-op, Brooklyn brownstone, Queens two-family home, and newer condo can all need different access planning, hardware choices, and field-measure expectations.

### Finished tile or still planning?

Finished tile calls for a final field measure before glass fabrication. If the bathroom is still under construction, we can still help plan swing, fixed-panel, or sliding options early.

### Door, panel, slider, or open entry?

The best layout depends on opening width, curb slope, vanity clearance, toilet position, and how much splash control the bathroom needs.

### Building coordination needed?

If the building needs COI paperwork, freight scheduling, protection rules, or weekday work windows, it is better to flag that before the quote is finalized.

[Installation](https://metroglasspro.com/shower-door-installation-nyc/)

[Replacement](https://metroglasspro.com/shower-door-replacement-nyc/)

[Repair](https://metroglasspro.com/shower-door-repair-nyc/)

[Manhattan Planning](https://metroglasspro.com/service-areas/manhattan/)

[Queens Planning](https://metroglasspro.com/service-areas/queens/)

[Cost Factors](https://metroglasspro.com/projects/frameless-shower-door-cost-nyc/)

### Compare shower door hinges

Compare CRL Geneva and Vienna hinges before choosing a frameless door package.

[Compare shower door hinges](https://metroglasspro.com/projects/crl-geneva-vs-vienna-hinges/)

### Co-op and condo installs

COIs, freight rules, elevator scheduling, and building coordination for NYC apartments.

[Co-op and condo installs](https://metroglasspro.com/projects/coop-condo-shower-door-installation-nyc/)

### Lower East Side example

A compact Manhattan bathroom before and after with a cleaner custom glass enclosure.

[Lower East Side example](https://metroglasspro.com/projects/84-clinton-lower-east-side-shower-door-before-after/)

### Need a new install?

Start here when the bathroom is tiled, measured, and ready for a custom glass installation.

[Need a new install?](https://metroglasspro.com/shower-door-installation-nyc/)

### Replacing an old door?

Use this path for old framed doors, leaking enclosures, cracked glass, or a frameless upgrade.

[Replacing an old door?](https://metroglasspro.com/shower-door-replacement-nyc/)

### Repair first?

Use this path for leaks, sweeps, loose hinges, dragging glass, or repair-versus-replace decisions.

[Repair first?](https://metroglasspro.com/shower-door-repair-nyc/)

What We Install

## Every configuration, any bathroom.

![Single swing frameless shower door with satin brass hinges and handle](https://metroglasspro.com/optimized/46f936af404cfd3c-1440.webp)

### Single Swing Door

A clean single-door layout. Swing direction, hinge choice, and clearances need a review of the actual opening.

![Frameless shower door with fixed glass panel and satin brass hardware](https://metroglasspro.com/optimized/5535c2149d2d41eb-1440.webp)

### Door + Fixed Panel

Ideal for wider openings. One swinging door plus a stationary glass panel, connected with a glass-to-glass hinge or U-channel.

![Sliding bypass frameless shower doors with satin brass barn-door track](https://metroglasspro.com/optimized/cc3730f02b2b6bf9-1440.webp)

### Sliding Bypass Doors

Two panels on a track — one slides behind the other. Perfect for tub-shower combos where swing clearance is limited.

![Neo-angle frameless glass shower enclosure with brass clamps — top view](https://metroglasspro.com/optimized/fe9185275ae5c28d-1440.webp)

### Neo-Angle Enclosures

Three glass panels forming a corner entry. Fits non-standard or angled shower bases common in older NYC buildings.

![90-degree corner frameless glass enclosure with satin brass glass-to-glass hinge](https://metroglasspro.com/optimized/b7c39c65ee76a3d1-1440.webp)

### 90° Corner Enclosures

Two glass walls meeting at a right angle with a door panel. A true luxury look for built-in shower niches.

![Walk-in frameless glass shower panel with satin brass wall clamps](https://metroglasspro.com/optimized/3960a86d0d25ad85-1341.webp)

### Walk-In / Open Entry

A single fixed panel with no door — the "wet room" look. Increasingly popular in high-end NYC bathroom renovations.

Materials

## Glass thickness & hardware finishes.

### Glass Options

#### 3/8″ (10mm) Tempered Glass

Standard

The industry standard for residential frameless doors. Strong, safe, and cost-effective. Works well for single-door and door-plus-panel configurations in most NYC bathrooms.

#### 1/2″ (12mm) Tempered Glass

Premium

Thicker, heavier, and more substantial. Best for large panels, full enclosures, and luxury renovations where you want maximum weight and presence. Requires heavier-duty hardware.

**Glass types:** Clear, ultra-clear (low-iron), frosted, rain, and acid-etched. All tempered safety glass that meets ANSI Z97.1 standards.

### Hardware Finishes

✓

Chrome — A bright silver finish that can coordinate with common plumbing fixtures.

✓

Brushed Nickel — Warm silver tone that hides water spots and fingerprints. Great for busy bathrooms.

✓

Matte Black — A strong contrast against light tile; check how it coordinates with the rest of the room.

✓

Satin Brass — A warm metal finish that can coordinate with brass fixtures and cabinet hardware.

✓

Polished Brass — Classic luxury look. Works well in traditional and pre-war styled bathrooms.

✓

Oil-Rubbed Bronze — Deep, rich brown with copper undertones. Ideal for rustic or transitional designs.

All hardware is commercial-grade with corrosion-resistant coatings. Hinges, clamps, handles, and towel bars are available in matching finishes for a unified look.

![Frameless shower door installed in NYC apartment](https://metroglasspro.com/optimized/d5a97b82a71a4747-1440.webp)

NYC Building Ready

## Co-op & condo install realities.

NYC apartment projects can add building management, documentation, elevator, protection, and work-hour requirements. Confirm those details before fabrication or scheduling.

### Insurance Documentation

Ask management for its exact certificate holder and additional insured wording, then send those requirements before scheduling. Management makes the final acceptance decision.

### Elevator & Freight Coordination

Confirm whether large glass panels require freight elevator access and who must reserve the elevator before an installation date is set.

### Work Hours & Protection Rules

Send the building’s approved work hours, hallway or elevator protection rules, and any notice requirements so they can be included in the installation plan.

### Doorman & Access Protocols

Confirm check-in, identification, service-entry, parking, and access instructions before installation day.

Our Process

## Measure → fabricate → install.

01

### Project Review & Field Measure

Initial Review

We review photos and rough dimensions first. If a field measure is needed, we confirm that visit and discuss the enclosure layout, glass, hardware, access, and building requirements.

02

### Custom Fabrication

Confirmed After Measure

Fabrication timing depends on the final field measurements, glass, hardware, supplier availability, and project conditions. The current schedule is confirmed before approval.

03

### Installation & Cure Guidance

Project-Specific

Installation duration depends on the enclosure, access, removal work, and building rules. After sealing, follow the exact cure and shower-use instructions provided for the product used.

Expert Installation

## How we prevent leaks.

The most common complaint about frameless shower doors is leaking — and it's almost always caused by poor measurement or improper installation, not the glass itself. Here's how we eliminate the problem:

✓

### Precision templating to 1/16″

We don't guess measurements or use "standard" sizes. Every panel is measured with precision tools against your actual tile and walls — accounting for out-of-plumb walls (extremely common in NYC pre-war buildings).

✓

### Professional-grade silicone sealing

All glass-to-wall and glass-to-tile joints are sealed with clear, mold-resistant silicone. This creates a watertight barrier without visible bulky gaskets.

✓

### Proper glass-to-glass seals

Where panels meet, we use clear vinyl sweeps and drip rails along the bottom edge to redirect water inward, not onto your floor.

✓

### Slope and drain alignment

We check that your shower floor slopes correctly toward the drain before installing. If we spot a slope issue, we let you know before proceeding.

Pricing

## Transparent pricing, no surprises.

Every shower is different, so we quote based on your exact measurements and preferences. Here are the main factors that affect your price:

### Glass Thickness

1/2″ glass costs more than 3/8″ — both in material and hardware (heavier glass needs sturdier hinges).

### Number of Panels

A single door is less than a full 3-panel enclosure. More glass = more material and labor.

### Configuration

Simple swing doors cost less than neo-angle or 90° corner enclosures that require multiple glass-to-glass connections.

### Hardware Finish

Chrome and brushed nickel are standard-priced. Matte black, satin brass, and specialty finishes have a modest upcharge.

### Glass Type

Clear glass is standard. Low-iron (ultra-clear), frosted, rain-textured, and acid-etched options add to the cost.

### Building Access

Walk-up apartments in most of NYC don't add cost. Very high-floor co-ops or buildings with limited freight access may add a small logistics fee.

Typical range: $800 – $3,000+

Based on configuration, glass, and hardware. Most NYC apartments fall in the $1,200–$2,000 range.

[Get Your Free Quote](https://metroglasspro.com/contact/)

Our Work

## Frameless shower doors we've installed in NYC.

![Frameless shower door installation Manhattan](https://metroglasspro.com/optimized/d5a97b82a71a4747-1440.webp)

![Custom glass enclosure Brooklyn](https://metroglasspro.com/optimized/f5b4fc94cb731d9d-1440.webp)

![Dark glass shower enclosure NYC](https://metroglasspro.com/optimized/d5a97b82a71a4747-1440.webp)

![Frameless enclosure NYC apartment](https://metroglasspro.com/optimized/f3b211161e9ae082-1440.webp)

![Glass shower panel Manhattan high-rise](https://metroglasspro.com/optimized/a8e4e5053bdbc550-1440.webp)

![Frameless door chrome hardware NYC](https://metroglasspro.com/optimized/f16319a325821241-1440.webp)

[View Full Gallery](https://metroglasspro.com/gallery/)

## Frequently asked questions.

### How much do frameless shower doors cost in NYC?

Published planning ranges start around $800–$1,600+ for a single swing door, $1,400–$2,600+ for a door with a fixed panel, $1,600–$3,000+ for sliding bypass doors, and $2,200–$4,500+ for corner or neo-angle enclosures. Final pricing depends on field measurements, glass, hardware, and installation conditions.

### How long does the whole process take from measurement to install?

The schedule is confirmed after final field measurements. Glass and hardware selection, supplier availability, building access, removal work, and the sealant used can all affect timing. Ask for the current fabrication window, installation plan, and cure instructions before booking.

### Can you install frameless shower doors in NYC co-ops and condos?

Co-op and condo requirements vary. Send management’s insurance wording, elevator or entry rules, work hours, and protection requirements before scheduling so the required documentation and logistics can be confirmed for your project.

### Do frameless shower doors leak?

Frameless shower doors are designed to contain normal shower spray, but they are not watertight tanks. Door clearances, showerhead direction, curb slope, seals, and the enclosure layout all affect water containment. If water escapes, send photos of the door, curb, and the area that gets wet so we can assess whether a seal, adjustment, or a different layout is needed.

### What glass thickness should I choose — 3/8″ or 1/2″?

3/8″ (10mm) and 1/2″ (12mm) tempered glass are possible options for some frameless layouts. Panel size, weight, hardware rating, support, and applicable requirements determine the suitable specification for a particular opening.

### What hardware finishes do you offer?

Finish options can include chrome, brushed nickel, matte black, satin brass, polished brass, and oil-rubbed bronze. Match the selected hardware to the bathroom fixtures and confirm current supplier availability.

### Which areas in NYC do you serve?

All five boroughs — Manhattan, Brooklyn, Queens, The Bronx, and Staten Island. We also serve parts of Long Island and Northern New Jersey.

### What building documents should I confirm before scheduling?

Ask MetroGlass Pro to confirm current insurance documentation for your project, then send your building’s exact certificate holder and additional insured wording. Building management determines whether submitted documents are accepted.

Serving All Five Boroughs

We install frameless shower doors in Manhattan, Brooklyn, Queens, The Bronx, and Staten Island — plus parts of Long Island and Northern New Jersey.

[View All Service Areas →](https://metroglasspro.com/service-areas/)

![Water on glass](https://metroglasspro.com/optimized/c645089547a03f5e-1440.webp)

## Ready for frameless shower doors?

Send photos and rough dimensions to start a project-specific estimate.

[Request an Estimate](https://metroglasspro.com/contact/)

[Call (332) 999-3846](tel:+13329993846)